Iron slide gate with a pad-mounted operator

All-O-Matic Gate Operator Repair — Southern California

Swing, slide and overhead operators from a Van Nuys manufacturer, diagnosed before anything is replaced.

CALL 661-605-3266 TEXT US A PHOTO FREE ESTIMATE

Written diagnosis before any work · Operators other companies installed · CSLB #1042768

01 — SYMPTOMS
5 SIGNS

Is your All-O-Matic gate doing this?

Call, or text us a photo of the operator.

CALL 661-605-3266 TEXT US A PHOTO
02 — THE BRAND
ALL-O-MATIC

About All-O-Matic

All-O-Matic is based in Van Nuys, in the San Fernando Valley, and designs and assembles its gate operators in-house. It has been building them for more than 20 years. The range covers swing, slide and overhead gate operators and a barrier arm operator, and its DC PRO models can run on battery backup and solar power.

03 — WHAT WE DO
7 SERVICES

All-O-Matic services we handle

01
Swing and slide operator repair, DC PRO and older AC models
02
ALL-BLDC PRO control board diagnosis
03
Limit switch and cam adjustment
04
Obstruction sensing (ERD) testing and adjustment
05
Battery backup, fail-safe and fail-secure setup
06
Primary and secondary pairing on double gates
07
Foot-pedal release and kill-switch repair
04 — MODELS
6 OPERATORS

All-O-Matic models we service

Don't see yours? Text a photo of the operator label and we'll tell you whether we can support it.

Swing All-O-Matic SW-350DC PRO Brushless DC swing operator. Obstruction shut-downs, limits and battery faults are the usual calls. REPAIR & RETROFIT → Slide All-O-Matic SL-100DC PRO Brushless DC slide operator. Obstruction shut-downs, safety inputs and battery faults are the usual calls. REPAIR & RETROFIT →
All-O-Matic SW-300DC PRO / SW-325DC PRO
Swing
Other DC PRO swing operators. Board, limit and arm service.
All-O-Matic SL-150DC PRO / SL-90DC PRO / SL-45DC PRO
Slide
Other DC PRO slide operators, covered by the same manual as the SL-100DC PRO. Board, drive and battery service.
All-O-Matic SL-100AC / SL-150AC
Slide, discontinued
Repaired where parts allow, or retrofit to a current DC PRO model.
All-O-Matic OH-200
Overhead
Overhead operators for tilt-up gates. Drive and board service.
05 — WHY VERITAS
THREE POINTS

Why Veritas for All-O-Matic

Written diagnosis before any work

We find the fault first and put it in writing with the price. Nothing gets replaced on a guess.

Operators other companies installed

Servicing equipment other companies installed is most of our repair work. We document what is there and take it from where it is.

Licensed California contractor

CSLB #1042768, licensed and insured. The record is public on the CSLB site. Check the license.

06 — FAQS
7 QUESTIONS

All-O-Matic gate repair FAQs

Is there an All-O-Matic gate repair company near me?

Veritas Access Solutions repairs All-O-Matic gate operators across Los Angeles, Ventura and Kern counties, from Santa Clarita and the San Fernando Valley to the Westside and Pasadena. Call 661-605-3266, or text a photo of the operator and we call back within 30 minutes during business hours.

Which All-O-Matic operators do you work on?

Swing, slide and overhead operators, including the SW-350DC PRO and the other SW DC PRO swing models, the SL-100DC PRO and SL-150DC PRO slides, and the discontinued SL-100AC and SL-150AC. If your model is not listed, text a photo of the label and we will tell you whether we can support it.

Can you repair older All-O-Matic operators?

Usually, yes. Some AC models, such as the SL-100AC, SL-150AC and SW-350 AC, are discontinued. We confirm parts for your exact unit before scheduling, and quote a retrofit to a current DC PRO model when a part is no longer available.

Should I repair or replace an old All-O-Matic gate operator?

Repair it when the motor and mounting are sound and parts are available. Replace it when the same unit keeps failing, the parts are gone, or the gate is heavier or longer than the operator is rated for.

Is my All-O-Matic operator still under warranty?

All-O-Matic states 7 years residential and 5 years commercial on the SW-350DC PRO and most DC PRO models, covering circuitry, motor, gearbox and workmanship, if the registration card was mailed within 30 days. Otherwise it is one year on parts. Shipping and labor are the owner's cost.

What does All-O-Matic gate repair cost?

It depends on the fault, the operator model, whether the part is under warranty and how easily we can reach it. We diagnose on site and give you the price in writing before any work. The estimate is free.

Do you service All-O-Matic operators another company installed?

Yes. Servicing equipment other companies installed is most of our repair work.

07 — NEAR YOU
24 CITIES · LA · VENTURA · KERN

All-O-Matic gate repair near you

Based in Santa Clarita, dispatched across Los Angeles, Ventura and Kern counties.

08 — FREE ESTIMATE
WRITTEN DIAGNOSIS FIRST

Get a free estimate

We call back within 30 minutes during business hours.

GATE DOWN NOW? CALL 661-605-3266 OR TEXT US A PHOTO OF THE OPERATOR.
WHAT HAPPENS NEXT
01
We call back within 30 minutes during business hours.
02
We diagnose the operator, board and safety devices on site.
03
You get a written diagnosis and price before any work starts.
Or book a professional Security Assessment.

The free estimate prices the work you already want. The paid assessment is a Red Team walk of your perimeter, with a written report.

BOOK AN ASSESSMENT →
MORE BRANDS
SAME CREW

Other brands we service

GATE OPERATORS LiftMaster → GATE OPERATORS FAAC → GATE OPERATORS DoorKing → GATE OPERATORS Viking → IP VIDEO INTERCOM DoorBird → CLOUD CAMERAS & ACCESS Verkada → LIVE-GUARD DETERRENCE Deep Sentinel → GATE OPERATORS BFT → GATE OPERATORS CAME → GATE OPERATORS HySecurity → GATE OPERATORS Nice/Apollo → GATE OPERATORS US Automatic → ALL BRANDS The full list →

All-O-Matic and its product names are trademarks of their respective owner. Veritas Access Solutions is an independent service company.

We protect people, property, and peace.